USB AMR JTAG Simulation J-Link v8

USB AMR JTAG Simulation J-Link v8



USB AMR JTAG Simulation J-Link v8

 Brief introduction:
J-Link is a JTAG emulator produced by SEGGER Company. It supports ARM emulation. In coordination with IAR EWARM，ADS，KEIL，WINARM，Real View , it supports all chips in ARM7/ARM9. It compatible with many integrated development environments. Also it is easy to handle and connect and best development tool of studying and developing ARM.
J-Link supports ARM kernel:
* ARM7TDMI（Rev 1）
* ARM7TDMI（Rev 3）
* ARM7TDMI-S（Rev 4）
* ARM720T
* ARM920T
* ARM926EJ-S
* ARM946E-S
* ARM966E-S
* ARM11
* Cortex-M3
Main features:
* It is a JTAG emulation of development environment.
* It supports all kernel chips in ARM7/ARM9 and cortex M3 mode includes Thumb.
* It supports almost all development environments such as ADS, IAR, KEIL, WINARM, and REAL VIEW.
* The speed of download is up to RM7:600kB/s，ARM9:550kB/s, though DCC, is 800kB/s.
* The highest speed of JTAG IS 12 MHz
* The range of target board is 1.2V, 3.3V and 5V, compatible.
* Ii has automatical baud rate identify function.
* It surveys all JTAG signals and target board voltage.
* It completely plugs and plays.
* It is USB powered.
* It has USB  cable and 20 pins flat cables.
* It supports many series connections of JTAG components.
* Standard 20 pins JTAG emulation connector.
* It is equipped 14 pins JTAG emulation connector.
* It is equipped 5V target board adapter.
* It has J-Link TCP/IP server and allows using J-Link by TCP/ IP network.

Package list:
* 1 V8 emulation mainframe.
* 1 20P standard JTAG cable.
* 1 fine-copper USB cable.